SBB fiberglass cable protection sleeve

Fiberglass cable protection conduit is a type of pipe made of resin as the main body, reinforced with connecting fibers and fabrics, and formed through computer-controlled winding or extrusion processes.

Email:

sales@antoptrade.com

Phone/WhatsApp:

+86-15607558662

Inquire Now

Product Introduction

Product Specifications

Inner Diameter φ (mm)	50	70	80	100	100	125	150	150	175	200	200
Wall Thickness (mm)	5.0	5.0	5.0	5.0	8.0	5.0	5.0	8.0	8.0	8.0	10.0

Product functional characteristics

Fiberglass cable protection tube, reinforced with fiberglass and bonded with unsaturated resin, has strong pressure resistance, light weight, smooth inner wall, low friction coefficient, and is easy to use when threading cables without damaging them.
1. High strength, used for direct burial under the roadway, without the need for a concrete protective layer, can accelerate the progress of cable engineering construction.
2. The pipe material is flexible and can withstand damage caused by external pressure and foundation settlement.
3. Insulation, non corrosive, suitable for laying single core cables; It has the advantage of corrosion resistance and can be used in high-temperature saline alkali areas.
4. Flame retardant, good heat resistance, can be used for a long time at a high temperature of 130 ° C without deformation.
5. The inner wall is smooth and does not scratch the cable. Add rubber seal at the joint to adapt to thermal expansion and contraction, and also prevent sand and mud from entering.
6. The design adopts a plug-in connection method, which is convenient for installation and connection. The body is lightweight, and the installation and construction are simple and convenient. One person can move it, and two people can install it on site, which can greatly shorten the construction period and reduce the installation cost. At the same time, it also avoids the problem of long exposure time during road excavation, which may affect urban traffic order.
8. Widely applicable; Composite fiberglass cable protection conduit is suitable for use as a protective conduit when cables are buried underground, and is also used in high demand situations such as cable crossing bridges and rivers. By using a matching professional pipe pillow combination, it can form a multi-layer and multi column multi duct pipe arrangement method.

Technical parameters

Item	Unit	Technical Indicators
Tensile Strength	MPa	≥ 160
Flexural Strength	MPa	≥ 190
Flexural Strength after Water Immersion	GPa	≥ 150
Barcol Hardness	—	≥ 38
Ring Stiffness (at 5°C)	kPa	SN25 ≥ 25; SN50 ≥ 50; SN100 ≥ 100
Deflection Temperature Under Load (Tfe 1.8)	°C	≥ 160
Drop Weight Impact	—	No delamination, cracks, or rupture on inner/outer walls of mechanically wound conduits after water immersion
Flat Load Retention Rate	%	≥ 85
Alkali Metal Oxide Content	%	For medium-alkali glass fiber: 11.6 ~ 12.4; for non-alkali glass fiber: ≤ 0.8
Oxygen Index	%	≥ 26

Factory

Hebei Xiong'an Antop Trading Co., Ltd. is located in the national-level Hebei Xiong'an New Area, at the center of the Beijing-Tianjin-Shijiazhuang economic belt. With convenient transportation and superior geographical advantages, the company is a comprehensive trading enterprise integrating pipe material sales, technical services, and supply chain solutions. With Jinghua Plastic Products Co., Ltd. as its exclusive manufacturing base, Antop has established an integrated "trade + production" operation model, deeply serving the construction of Xiong'an New Area and various national sectors including municipal engineering, electric power, telecommunications, construction, water conservancy, and agriculture. The company is committed to providing customers with high-quality piping systems and one-stop solutions.

Relying on the strength of its own factory, Jinghua Plastic, the company brings nearly 40 years of experience in pipe manufacturing. Jinghua is recognized as a National High-tech Enterprise and a Hebei Provincial Sci-Tech SME. It occupies an area of 80,000 square meters, with an annual production capacity of 200,000 tons, and is equipped with internationally advanced production and testing equipment. The company holds three major management system certifications: ISO9001, ISO14001, and ISO45001. Its main product portfolio covers five major series — Power Conduits, Telecommunication Conduits, Water Supply Pipes, Drainage Pipes, and Special Application Pipes — including over 100 specifications such as MPP power conduits, HDPE water supply pipes, Krinkle pipes (corrugated pipes), honeycomb conduit pipes (multi-hole pipes), PE gas pipes, and mining pipes. These products are non-toxic, environmentally friendly, pressure-resistant, and corrosion-resistant, with a service life of up to 50 years. They are widely used in key projects such as urban utility tunnels, state power grids, highways, and agricultural irrigation.

Enterprise advantages

All products undergo rigorous quality control processes and meet international standards.

We provide customized products to meet specific project requirements and specifications.

Direct manufacturing allows us to offer competitive prices without compromising on quality.

Efficient shipping and logistics solutions to deliver products worldwide on time.

Factory direct supply quality trust

Production of PE single wall corrugated coil

FAQ

Can you accept small quantities?

Yes, accept small quantity, fast delivery

Do you have pre-shipment inspection procedures?

Yes, we always test the products before delivery.

Can I take samples for testing?

Yes, samples can be sent for testing before bulk ordering.

When is the delivery time?

Inventory orders within 7-15 days, for oem and odm orders, the specific time depends on the actual situation.

What are the terms of payment?

Wire transfer or letter of credit, Western Union, Alipay, etc.

SBB fiberglass cable protection sleeve

Email:

sales@antoptrade.com

WhatsApp:

+8615607558662

Inquire Now